关键字
协会热线:029-84276641
            首页微电机期刊
 
  综述
  伺服与控制
  设计与研究
  专题讲座
  检测技术
  工艺技术
  经验交流
  实用技术
  读者园地
  技术交流
  使用与维护
  标准评述
  工艺与装备
  驱动与控制
  应用研究
  测试研究
  精品连载
 
标题:一种抑制无刷直流电机换相转矩脉动的预测电流控制策略
作者:俞旻杰,储剑波
2016年第11期 访问次数:232次

摘要:针对无刷直流电机存在换相转矩脉动的问题,提出一种抑制无刷直流电机换相转矩脉动的预测电流控制策略。文中首先基于无刷直流电机的数学模型分析了换相转矩脉动产生的原理;然后在电流预测控制策略的思想上结合重叠换相的方法,控制开通相和关断相的电流变化率相等,同时结合基于检测换相电流变化率的预测电流补偿方法,从而使非换相相电流保持不变,达到抑制换相转矩脉动的目的;最后通过仿真和实验验证了控制策略的可行性和有效性。
关键词:无刷直流电机;换相转矩脉动抑制;预测电流控制;重叠换相;预测电流补偿
Abstract: A new predictive current control strategy was proposed to suppress the commutation torque ripple in brushless DC motor. In this paper, the principle of the commutation torque ripple was analyzed firstly, and then a method of combining the theory of the current predictive control strategy with the method of overlapping was proposed to guarantee equal between current decline rate of shutdown phase and current rising rate of opening phase during commutation. At the same time, combined predictive current compensation method based on the detection of the change rate of commutation current, thus, the current of un-commutation was kept stable. The control strategy was designed to achieve the purpose of suppressing the commutation torque ripple. Finally, the feasibility and effectiveness of the control strategy were verified by simulation and experiments.
Key words: brushless DC motor; commutation torque ripple; predictive current control; overlapping commutation; predictive current compensation
 
 
 
    广告服务 |   商务合作 |   使用帮助 |   网站地图 |     主办:中国电器工业协会微电机分会      挂靠:西安微电机研究所有限公司      地址:西安市高新区上林苑四路36号(710117)
   copyright © www.china-micromotor.com.cn all rights reserved.     版权所有:微电机网     陕ICP备05005551号-2
 

西安微电机研究所有限公司公众平台
二维码

《微电机》杂志公众平台二维码