关键字
协会热线:029-84276641
            首页微电机期刊
 
  综述
  伺服与控制
  设计与研究
  专题讲座
  检测技术
  工艺技术
  经验交流
  实用技术
  读者园地
  技术交流
  使用与维护
  标准评述
  工艺与装备
  驱动与控制
  应用研究
  测试研究
  精品连载
 
标题:基于多目标克隆选择算法的自适应模糊控制器设计
作者:周万顺,张雷
2014年第3期 访问次数:239次

摘要:针对无刷直流电机自适应模糊控制器的优化问题,提出了一种利用基于Pareto最优的多目标克隆选择算法来优化控制系统中的模糊控制规则库的方法。首先确定模糊隶属度函数,然后以电机转速的超调量、上升时间和过渡时间作为优化的目标函数,利用多目标克隆选择算法优化专家经验规则库,使各项指标达到最优。无刷直流电机速度控制系统采用电流环和转速环双闭环控制系统,其中转速环采用多目标克隆选择算法优化的自适应模糊控制器进行控制,而电流环则采用传统的PI控制方法。仿真实验结果表明所设计的无刷直流电机自适应模糊控制系统,响应快、无超调,并且具有较强的自适应性和鲁棒性。

关键词:无刷直流电机;多目标优化;自适应控制;模糊控制;克隆选择算法

Abstract: According to optimization problems on selfadaptive fuzzy controller of brushless DC motor, a design method of determining the fuzzy control rule base based on the Pareto optimal multiobjective clonal selection algorithm was proposed Firstly fixed the membership function, and then with the overshoot amount, rise time and transition time of motor speed as the optimization objective function and adjusted and optimized the membership functions by using multiobjective clonal selection algorithms further The current and speed double closeloop control was adopted, in which the fuzzy adaptive controller based on genetic optimization was applied in the speed loop The simulation results show that the designed brushless DC motor selfadaptive fuzzy control system has fast dynamic response characteristic, nonovershoot, good adaptability and robustness

Key words: brushless DC motor; multiobjective optimization ; adaptive control; fuzzy control; clonal selection algorithm

 

 
 
 
    广告服务 |   商务合作 |   使用帮助 |   网站地图 |     主办:中国电器工业协会微电机分会      挂靠:西安微电机研究所有限公司      地址:西安市高新区上林苑四路36号(710117)
   copyright © www.china-micromotor.com.cn all rights reserved.     版权所有:微电机网     陕ICP备05005551号-2
 

西安微电机研究所有限公司公众平台
二维码

《微电机》杂志公众平台二维码